Livraison en 48h sur toute la Tunisie
Shop
Nouveau
BAMBU LAB X2D COMBO
4,290.000 TND
Caractéristiques du produit:
- Impression 3D à double buse
- Impression multicolore plus rapide et retrait des supports plus propre
- Buse à 300 °C et chauffage de la chambre active à 65 °C
- Extrudeuse à servomoteur en boucle fermée
- Détection par IA du chemin complet du filament
- Volume d’impression : 256 × 256 × 260 mm³
- Plage de tension : 100 – 120 V
- Pour connecter plus de deux AMS (y compris AMS 2 Pro et AMS HT), un adaptateur PTFE 4 en 1 (FAZ013-N) est nécessaire.
📦 Rupture de stock – Précommande possible
CompareBambu Lab X2D
Xcellence made simple
Why Choose Bambu Lab X2D
Dual nozzle
Multi-material made simple.
Servo Extruder
Smooth surfaces at full speed.
Dual-intake cooling
Crisp details.
Active heating.
Stronger parts.
Adaptive Calibration.
Lasting precision
AI Monitoring
Your built-in backup.
Certified Emissions
Designed for your home.
Dual Nozzle System.
Stop overthinking with support – start peeling it off clean.
The main nozzle prints the part. The auxiliary nozzle handles the support¹. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean.
Add more color, more details and more fun.
Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste².
Finer. Sharper. True to the design.
Tap. Switch. Done. Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap.
A lighter toolhead means less inertia and vibration. Even at full speed, surfaces stay flawless – all the way to the top.
Cool it. Before gravity makes it droop.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
X2D Cooling
Typical Cooling
Hot Enough Isn’t Enough. Heat It Even.
The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber – hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn’t the point – the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
X2D Heating
Typical Heating
Calibration adapts to wear and material changes.
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn’t. Flow Dynamics Calibration³ builds a time-varying, nonlinear model of your entire extrusion system. So whether there’s minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
PMSM Servo System: Smoother surfaces start inside the extruder.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system⁵ counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
Smooth surface quality.
Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print.
Compensation makes corners sharp and details clean.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time – so edges print crisp, no matter how fast.
AI Camera keeps an eye on your prints.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for debris and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time – pausing the job before it wastes hours of time and filament.
Fully-equipped sensors cover every critical stage.
31 sensors span the entire system – monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
Filament Path Monitoring ｜ Thermal Control
All the must-haves for everyday use.
Safe for your living room.
The X2D is UL 2904 certified for indoor air quality when printing with Bambu PLA Basic and PETG Basic. Confirmed for low particle and VOC emissions – so you can print in your personal space with peace of mind.
Tool-free nozzle swap.
Swap nozzles in seconds. No tools, no hassle. Easy for first-time users.
Quiet enough for overnight prints.
Active Motor Noise Canceling and a noise-optimized air duct keep X2D below 50 dB under typical conditions. Quiet enough for overnight printing⁷.
See every detail, remotely.
Brighter chamber lighting makes Live View and time-lapse clearer than ever, so you can check on prints from anywhere.
One million switches. Still smooth.
X2D’s dual-nozzle system completed over 1,000,000 switch cycles in life-cycle testing, maintaining smooth and consistent motion throughout. Built for years of dependable use.
A printer that updates like your phone.
X2D prints beautifully the day it arrives. And it gets better with every update. Major firmware updates land roughly every three months⁸ – new features, better performance, all pushed straight to your machine.
What’s in the box
| X2D | X2D AMS Combo | |
|---|---|---|
 X2D |
x
|
x
|
 Textured PEI Build Plate |
x
|
x
|
 External Exhaust Fan Bundle |
x
|
x
|
 Accessory Box |
x
|
x
|
 Spool holder |
x
|
x
|
 AMS 2 Pro (combo version) |
no |
x
|
Bambu Lab X2D – Technical Specifications
|
Item
|
Specifications | |
| Printing Technology |
Fused Deposition Modeling
|
|
| Body | Build Volume (W*D*H) |
Main Nozzle Printing: 256*256*260 mm³
Auxiliary Nozzle Printing: 235.5*256*256 mm³
Dual Nozzle Printing: 235.5*256*256 mm³
Total Volume for Two Nozzles: 256*256*260 mm³
|
| Chassis |
Plastic and Steel
|
|
|
Outer Frame
|
Plastic, Glass, and Metal
|
|
| Dimensions and Weight | Physical Dimensions |
392*406*478 mm³
|
| Net Weight |
16.25 kg
|
|
| Toolhead | Main Extruder Gear | Hardened Steel |
| Main Extruder Motor |
Bambu Lab High-precision Permanent Magnet Synchronous Motor
|
|
|
Auxiliary Extruder Gear
|
Hardened Steel
|
|
|
Auxiliary Extruder Motor
|
Stepper Motor
|
|
| Nozzle | Hardened Steel | |
| Max Nozzle Temperature | 300 °C | |
| Included Nozzle Diameter | 0.4 mm | |
|
Supported Nozzle Diameter
|
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
|
|
| Filament Cutter | Built-in | |
| Filament Diameter | 1.75 mm | |
| Heatbed | Supported Build Plate Type |
Textured PEI Plate, Smooth PEI Plate, Cool Plate SuperTack, Engineering Plate
|
| Max Heatbed Temperature | 120 ℃ | |
| Speed | Max Speed of Toolhead | 1000 mm/s |
| Max Acceleration of Toolhead | 20,000 mm/s² | |
|
Max Flow for Hotend
(Standard Flow Hotend)
|
40 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
|
|
|
Max Flow for Hotend
(Optional High Flow Hotend)
|
65 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
|
|
|
Chamber Temperature Control
|
Active Chamber Heating
|
Supported
|
|
Max Temperature
|
65 °C
|
|
|
Air Purification
|
Pre-filter Grade
|
G3 |
|
HEPA Filter Grade
|
H12
|
|
|
Activated Carbon Filter Type
|
Granulated Coconut Shell
|
|
|
VOC Filtration
|
Supported
|
|
|
Particulate Matter Filtration
|
Supported
|
|
|
Cooling
|
Part Cooling Fan
|
Closed Loop Control
|
|
Cooling Fan for Hotend
|
Closed Loop Control
|
|
|
Main Control Board Fan
|
Closed Loop Control
|
|
|
Chamber Exhaust Fan
|
Closed Loop Control
|
|
|
Chamber Heat Circulation Fan
|
Closed Loop Control
|
|
|
Auxiliary Part Cooling Fan
|
Closed Loop Control
|
|
|
Filament Supported
|
Main Hotend
|
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PPA, PET
|
|
Auxiliary Hotend
|
PLA (excluding PLA Aero), PETG, ABS, ASA, TPU for AMS, Support for PLA, Support for PLA/PETG, Support for ABS, Support for PA/PET, PET, PA, PC, PVA; Carbon/Glass Fiber Reinforced PLA, PETG, ABS, ASA, PA6, PAHT, PET
|
|
|
Auxiliary Hotend (print with caution¹)
|
PLA Silk, PETG-CF, ASA-CF, PA6-CF, TPU for AMS, Support for PA/PET
|
|
| Sensor |
Live View Camera
|
Built-in; 1920*1080
|
|
Toolhead Camera
|
Built-in; 1600*1200
|
|
| Door Sensor | Supported | |
| Filament Run Out Sensor | Supported | |
| Filament Tangle Sensor | Supported | |
| Filament Odometry | Supported with AMS | |
| Power Loss Recovery | Supported | |
|
Electrical Requirements²
|
Voltage |
High-voltage version: 200-240 VAC, 50/60 Hz
Low-voltage version: 100-120 VAC , 50/60 Hz
|
|
Max Power³
|
High-voltage version: 1600 W@220 V
Low-voltage version: 1100 W@110 V
|
|
|
Steady-State Power
|
High-voltage version:
PLA (25 °C): 250 W@220 V
PC (25 °C): 550 W@220 V
Low-voltage version:
PLA (25 °C): 250 W@110 V
PC (25 °C): 550 W@110 V
|
|
|
Environment Requirements
|
Working Temperature
|
10 °C-30 °C
|
| Electronics | Touchscreen |
5-inch 1280*720 Touchscreen
|
| Storage |
Built-in 8 GB EMMC and USB Port
|
|
| Control Interface | Touchscreen, mobile App, PC App | |
|
Motion Controller
|
Dual-core Cortex-M4 and Single-core Cortex-M7
|
|
|
Application Processor
|
Quad-core ARM with dedicated NPU
|
|
| Software | Slicer |
Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
|
| Supported Operating System |
MacOS, Windows, Linux
|
|
|
Network Control
|
Ethernet
|
Not Available
|
|
Wireless Network
|
Dual-Band Wi-Fi
|
|
|
Network Kill Switch
|
Not Available
|
|
|
Removable Network Module
|
Not Available
|
|
|
802.1X Network Access Control
|
Not Available
|
|
| Wi-Fi | Operating Frequency |
2412 – 2472 MHz, 5150 – 5850 MHz (FCC/CE)
2400 – 2483.5 MHz, 5150 – 5850 MHz (SRRC)
|
| Wi-Fi Transmitter Power (EIRP) |
2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
|
|
| Wi-Fi Protocol | IEEE 802.11 a/b/g/n | |
1）For optimal print quality, please use the main hotend to print these filaments. 2）The printer’s voltage specifications vary by sales region. Before use, please check the label next to the power socket on the printer to ensure the supplied voltage matches the indicated voltage. 3) To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3-5 minutes.
Product Variation Notice
Depending on the production batch, your X2D may or may not include a silicone wiper near the nozzle-switching area. Its function has since been replicated through a software update, so both versions perform identically.
| Poids | 22 kg |
|---|---|
| Dimensions | 49 × 49 × 56 cm |
