ELEGOO RAPID PLA+ 1Kg.

Extrusion/Nozzle Temp: 200-230°C (recommended 220°C)
Recommended Heated Bed Temp: 40-60°C
Dimensional Accuracy 99% Probability: +/- 0.02mm
Printing Speed: 30~600 mm/s
Print layer thickness: 0.2mm
Net Weight: 1 kg/spool (2.2 lbs)
Recommended Platform: Glass/Fiberglass Board/PEI+PVP glue stick or platform spray
Density: 1.20 (g/cm³)
Melt Index: 8.2(190°C/2.16kg)g/10min
Tensile strength (X-Y): ≥ 60 (MPa)
Elongation at break (X-Y): 19 (%)
Bending modulus: 2680 (MPa)
Bending strength: 80 (MPa)
Izod Notch Impact Strength: 3.85 (kJ/m²)
Thermal Distortion Temp: 53°C (0.45MPa)
Fan: 100%
Rockwell Hardness: 88